Long Sections

Production of all kinds of sheets is done by hot and cold rolling method, in such a way that the steel ingot is heated to a temperature before melting until it becomes a paste. For the production of each type of steel product, a kind of ingot must be used.  Of course, here we mention the important issue that the products that are produced using ingots are all produced by hot rolling process.

  • check-mark-013  the ingot is sent to the manufacturing plant in the form of cast steel pieces.
  • check-mark-011  Furnaces at a temperature of 900 degrees Celsius.
  • check-mark-012 The classification of ingots is based on their dimensions.
steel-sections-01
steel-sections-02

Billet (billet)

Considering that the sides of the billet are equal, it is considered very suitable for solid sections. When the molten billet passes through the rolling rollers, it can be placed in the most central part of the mold, so the most molten part of the billet becomes the desired section. This makes the mechanical properties of the product evenly distributed throughout the production length.

Slab  (slab)

Slab or Takthal is considered as the most known type of ingot. The dimensions of Takthal are such that its width is significantly larger than its thickness. Therefore, it is called flat. In fact, this ingot has a flat shape. It is clear that it is considered the best option for producing a product such as steel sheet.

steel-sections-03